9.808-246.0-A • Dual Mister Service Manual
PRESSURE
W
ASHER
SER
VICE MANU
AL
6
STEP 1:
Attach ½” hose to a disin-
fectant bucket. Avoid excesive water
columns (more that 19") formed by
the supply hose and the bucket.
We recommend Vital Oxide disin-
fectant.
STEP 7:
Start up the machine.
STEP 5:
Connect to apropriate
power supply. Push reset button
on GFCI.
STEP 9:
Atach misting nozzle into
the spray gun.
STEP 3:
Connect ¼” high pressure
hose to the discharge nipple. Push
coupler collar forward until secure.
STEP 6:
Close metering valve to
purge hose.
STEP 10:
Open metering valve for
Misting mode.
CAUTION: If valve stays close in
misting mode nozzle may get
damage
STEP 2:
Connect ½: hose to pump
Water inlet. Inspect inlets.
CAUTION: Do not run the pump
without water or pump damage
will result.
STEP 8:
Purge any air trapped in
hose (Recommend to do this over
the disinfectant bucket).
STEP 11:
Ready to use, mist Vital
Oxide disinfectant.
>19”
OPERATING INSTRUCTIONS FOR MISTING MODE
Pump
Water Inlet
Garden Hose
Discharge
Nipple
High
Pressure
Hose
Coupler Collar
STEP 4:
Attach the high pressure
hose to the spray gun.
Safety
Latch
Spray
Gun
High
Pressure Hose