manualshive.com logo in svg

Kärcher HD 1050 B, Руководство по обслуживанию

Поделиться
Скачать
Kärcher HD 1050 B Скачать руководство пользователя страница 6

Unit function

HD 1050

6

6.  Detergent metering valve

The knob is pressed onto the detergent metering
valve.

Turning the knob counter-clockwise moves the
tapered metering spindle out of the bore.

If the detergent metering spindle is turned
counter-clockwise as far as it will go, then a
lager quantity of detergent will be drawn in.

If the detergent metering spindle is turned clock-
wise as far as it will go, the “O” position is
reached an no detergent should be drawn in.

7. Nozzle setting

At standard working pressure (3-way nozzle set
to 0° pencil jet) no detergent is drawn in.

At standard working pressure (3-way nozzle set
to 25° fan jet) no detergent is drawn in.

Detergent is only drawn in when working at low
pressure (3-way nozzle to fan-jet CHEM).

8. Switching the 3-way nozzle

On the Kärcher HD 1050 cleaner, the nozzle is
set by turning the spray lance and or by turning
the nozzle garde.

Содержание HD 1050 B




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды