manualshive.com logo in svg

Kärcher HD 1050 B, Руководство по обслуживанию

Поделиться
Скачать
Kärcher HD 1050 B Скачать руководство пользователя страница 2

Foreword

HD 1050

Foreword

Indispensable prerequisites for the competent execution of service procedures are comprehensive,
real-life training workshops for technical personnel, supported by clearly designed documentation.

To meet these requirements, we provide all service technicians with regular courses dedicated to
basic training, and advanced workshops across our entire product range.

In addition, the service manuals developed for major Kärcher products are specifically designed to
be used as operating manuals during initial product familarization, and to serve as reference works
thereafter.

All of the referred measures are augmented by regularly scheduled releases of service information
containing pertinent details about continuing product development and improvement.

Text and illustrations contained in this manual may be copied, duplicated, and distributed to third
parties only with the prior written permission by Karcher lnternational Customer Service Training:

ALFRED KÄRCHER GmbH & Co. 
International Customer Service Training 
P. O. Box 160 
71349 Winnenden 
Germany 

http://www.karcher.de

Содержание HD 1050 B




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды