background image

10

  English

Detergents can only be applied with the black 
detergent nozzle.

  

STEP 

1:

  

  Install the black detergent nozzle for deter-

gent application at low pressure.

USING THE ACCESSORIES

WORKING WITH DETERGENTS

  

CAUTION

 

  High pressure in nozzle area. Risk of injury 

caused by improperly locked nozzle.

   

Make sure you hear the "click" when inserting 
the nozzle tip into the quick connection.

    Pull the nozzle to make sure it is seated 

properly before operating your  unit. (See 
OPERATING INSTRUCTIONS: Step 1)

 

 

WARNING

 

  To avoid serious injury never point spray  

nozzle at yourself, other persons or animals.

The color-coded quick connect nozzles provide a 
wide array of spray widths from 0° to 65° and are 
easily accessible when placed in the convenient 
nozzle holder.

0° spray angle = Red nozzle

For particularly stubborn accumulation of grime.          

Not recommended

 for soft materials like sidings, 

decks, painted surfaces, cars.

25° spray angle = Green nozzle

For dirt accumulation over a large surface.

65° spray angle = Black nozzle

For operating with detergents or cleaning with 
low pressure.

40° spray angle = White nozzle

For moderate dirt accumulation over a large 
surface.

Quick connect nozzles

15° spray angle = Yellow nozzle

For dirt accumulation over a surface.

  

STEP 

2:

 

  Fill a container with Kärcher detergent.Place 

the fi lter end of detergent suction tube into 
the container.

Содержание G 3050 OH

















Отзывы: