12
14 - AFTER USE, STORAGE
26. Store vacuum cleaner INDOOR in a room above 32 degrees F.
27. Store in a dry room
28. All the accessories can be stored on the machine.
a. Attach the floor nozzle on the back of the vacuum head.
b. Attach the wand/hose assembly on the back of the vacuum head.
c. Attach the remaining insert for the floor nozzle on top of the rear wheels.
WARNING! When not in use: disconnect the power cord from the electrical outlet.
15 - TROUBLE SHOOTING
Repair or service of electrical components such as cord or motor, must only be carried out by
an authorized service center.
If the vacuum does not start:
d. Check to see that the plug is correctly inserted in the electrical outlet and that
there is power at receptacle.
e. A circuit breaker may have tripped. Check the circuit breaker box.
f. The cord or plug may be damaged and must be repaired by an authorized service
center.
If motor stops:
g. A thermal overload protector will shut off the motor if the motor temperature is
too high. If this occurs, turn the switch off. Wait 5 minutes for the motor to cool.
Turn switch on and resume operation.
If suction power is reduced:
h.
The tank may be full and needs to be emptied. See #15.
i.
The wands, hose and nozzle may be clogged and need to be cleaned.
j.
Any of the above may be damaged and need to be replaced.
k. The filter may be clogged. Use the Filter Cleaning System (#14), to clean the filter.
Replace the filter or make sure the filter is installed properly.
l.
The hose connection is loose and need to be tightened.
Figure 12
