background image

– 10

ATTENTION

Illustration 

The appliance must only be used for the intake of dirt 
and fluids (max. 250 ml). 

Illustration 

Before beginning your work, remove any objects, such 
as shards, pebbles, screws or toy parts from the floor.
Before use, check the floor for water consistency at sus-
pect areas. Do not clean water-sensitive coatings, such 
as untreated cork floors (moisture ingress is possible 
which may damage the floor).

Illustration 

To avoid fresh footprints on the freshly-wiped floor, work 

backwards towards the door.

Hold the appliance at the handle at angle of approx. 

60 degrees.

Clean the floor by moving the appliance back and 

forth at a similar speed as if you were vacuum 

cleaning.

If the floor is especially dirty, let the appliance glide 

slowly across the floor. 

For scope of delivery of the roller pads in grey and 

yellow: Both roller pads have the same functionali-

ty, they can be used for different areas of applica-

tion (colour distinction, e.g. for kitchen and bath-

room).

Illustration 

Press the ON switch briefly.

After about 1-2 seconds, the rollers begin to rotate 

and the appliance is ready for use.

ATTENTION

After switching on the appliance, the cleaning rollers will 
begin to rotate. Hold the handle tight to prevent the ap-
pliance from moving forwards by itself.
Make sure the fresh water tank is filled with water and 
the waste water tank is fitted in the appliance.

Illustration 

To quickly wet the rollers, use a measuring cup to 

fill the cleaning station with 50 ml of fresh water.

Illustration 

Switch on the appliance and put it into operation in 

the station for 5 seconds. 

The appliance then has the ideal level of moisture 

in order to allow fast cleaning.

Switch off the appliance; press the on/off button to 

do so.

Illustration 

Remove the carrying handle from the cleaning sta-

tion and set it on the floor.

Hold the appliance firmly using the handle.

Illustration 

To switch on the appliance press the on/off switch.

Illustration 

3 LEDs illuminated - 3/3 battery run time (full run 

time).

2 LEDs illuminated - 2/3 battery run time.

1 LEDs illuminated - 1/3 battery run time.

The rollers signal 5 minutes before the run time 

ends by changing rotation direction.

The lowermost LED starts to flash approx. 2.5 min-

utes before the battery has to be charged.

The device shuts off automatically 1.5 minutes be-

fore the run time ends.

The remaining 1.5 minutes can be used for clean-

ing the device in the station by switching it back on 

again.

See "Cleaning the appliance by rinsing".

The lowermost LED flashes for another 10 seconds 

when the battery is empty and the device has 

switched off.

ATTENTION

Before filling the fresh water tank, please empty the 
waste water tank. In this way you can avoid overflowing 
of the waste water tank.

See Chapter "Emptying the waste water tank".

Illustration 

Place the appliance in the cleaning station.

Illustration 

Remove the fresh water tank from the appliance 

using the handle.

Illustration 

Open fuel filler cap.

Fill the fresh water tank with cold or lukewarm tap 

water.

Add cleaning or disinfecting agent as required.

Do not exceed the "MAX" marking when filling.

Close tank lock.

Illustration 

Insert the fresh water container into the appliance.

The fresh water tank must sit snugly into the appli-

ance.

ATTENTION

The water level must be checked at regular intervals to 
prevent the waste water tank from overflowing. Do not 
exceed the "MAX" marking.

Illustration 

Place the appliance in the cleaning station.

Illustration 

Hold the waste water tank at the bottom handle. At 

the same time, press the upper handle downwards 

with your thumbs.

Remove waste water tank.

Illustration 

Remove the cover from the waste water tank.

Empty the waste water tank.

Depending on the amount of dirt, clean the lid/sep-

arator and waste water tank with tap water.

Place the lid on the waste water tank.

The lid must sit snugly onto the waste water tank.

Illustration 

Insert the waste water tank into the appliance.

The waste water tank must sit snugly in the appli-

ance.

Operation

General information on the

 operation

Turning on the Appliance

Start working

Battery service life

Refill detergent

Emptying the waste Water tank

10

EN

Содержание FC 5

















Отзывы: