Kärcher BR 35/12 C BP, Руководство пользователя

Страница: 9 / 40

– 7
ATTENTION
Risk of damage. Do not sluice the appli-
ance with water and do not use aggressive
detergents.
 Drain off dirt water.
 Remove the lid of the wastewater reser-
voir and wash the inside of the lid and
the float with water.

Rinse the dirt water tank with clear wa-
ter.
 Clean the vacuum bar.
 Remove bulk waste container and emp-
ty it.
 Clean the outside of the appliance with
a damp cloth which has been soaked in
mild detergent.
 Clean the vacuum lips, check for wear
and replace them if required.
 Clean brush.
 Check the brush for wear and replace if
required (see "Maintenance tasks").
 Charge battery if required.
 Remove the water distribution bar on
the cleaning head and clean the water
channel.
1 Fresh water filter
 Clean the fresh water filter.
 Check the condition of the seals be-
tween dirt water reservoir and cover, re-
place if required.
 Have the prescribed inspection carried
out by the customer service.
 Compress the fastening devices and
pull the vacuum lips out of the vacuum
bar towards the bottom.
 Remove the vacuum lips from the hold-
er.
Note:
Thanks to the perforation pattern the vacu-
um lips cannot be mixed up. They cannot
be turned and reinstalled.
 Replace vacuum lips.
 Insert the holder with the vacuum lips
into the vacuum bar and snap into
place.
몇 WARNING
Risk of crushing due to the parking stand
folding up during the brush replacement.
Turn the steering wheel by 90° to the left
prior to the brush replacement.
 Press the release button for the brush
roller and swivel the brush roller toward
the bottom and pull it off the driver.
 Place the new brush roller on the driver
and lock into place on the opposite side.
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
Maintenance schedule
After the work
Weekly
Monthly
Yearly
Maintenance Works
Replacing the suction lips
Replacing the brush roller
Maintenance contract
9 EN