– 5
Î
Apply the detergent solution to the floor
or use the dosing lever of the detergent
tank (option).
Î
Move the appliance over the surface to
be cleaned.
Î
Repeat process for severe contamination.
Î
Afterwards, pick up the wastewater with
a wet vacuum or a cloth.
Caution
Risk of injury, risk of damage. The speed
switch may only be used while the appli-
ance is idle.
Î
Turn off the appliance.
Î
Select the desired speed via the speed
switch:
Position I = 150 U/min
Position II = 300 U/min
Î
Disconnect the mains plug from the
socket.
Î
Pull the lever for level adjustment and
bring the handle in a vertical position.
Î
Remove the detergent tank (option) and
dispose of unused detergent solution.
Î
Swivel the top cable hook downward.
Î
Coil the mains cable as shown.
Î
Swivel the top cable hook upward.
Î
Rinse the detergent tank (option) with
clear water.
Î
Place the appliance into the parking po-
sition.
Î
Remove the driver plate / disc brush.
Î
Clean the casing with a damp cloth.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Î
Swivel the handle vertically and lock it.
Î
Tilt the appliance backwards into the
transport position and drive it to its des-
tination location.
Î
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
Î
Place the appliance into the parking po-
sition.
Î
Store the appliance in a dry room, frost-
protected room.
Î
Rinse contaminated disc brushes with
water.
Î
Wash contaminated pads at a max.
temperature of 60 °C.
Î
Clean the casing with a damp cloth.
Î
Check the mains connection cable for
damages.
Cleaning
Adjust the speed (BDS 43/Duo C)
Shutting down
Transport
Storage
Maintenance and care
(1
