Kärcher BD 80 W Bp Pack, Руководство пользователя

Страница: 7 / 40

English 7
19
Suction bar
20
Suction bar height adjustment
21
Suction bar inclination adjustment
22
Wing nuts for fastening the suction bar
23
Suction hose
24
Fresh water filling level display
Fresh water drain hose
25
Cleaning head lever
26
Water volume regulation knob
27
Suction bar lever
28
Battery plug connector
29
Key-operated switch
30
Display
31
Working speed rotary knob
32
Travel direction switch
33
Waste water tank drain hose with dosing unit
** Not in scope of delivery
Color coding
 Control elements for the cleaning process are yellow.
 Control elements for maintenance and servicing are
light gray.
Symbols on the device
* optional
Installation
Unloading
1. Remove the carton.
2. Remove the straps.
3. Remove the wooden blocks fastened to the pallet by
screws.
4. Using the 3 upper reinforcing boards of the carton pack-
aging (80x24x970 mm) and the board screwed laterally
on the pallet (100x24x970 mm), place a ramp in front of
the pallet and secure it using board pallet screws.
1
Beam 80x60x625 mm
2
Board 80x24x970 mm
3
Board 100x24x970 mm
5. Push the beam which has been unscrewed from the pal-
let (80x60x625 mm) under the ramp for support and
screw into place.
6. Press the brake lever down.
1
Brake lever
7. Push the device forwards from the pallet.
8. Press the brake lever up.
Installing the suction bar
1. Insert the suction bar in the suction bar mount.
2. Tighten the wing nuts.
3. Fit the suction hose.
Fresh water tank drain opening
Waste water tank drain opening
Increased cleaning head contact pressure
Battery access
Fresh water tank filling level (50%)
Insert the charger plug here
Eyelet point
* Mop holder
ATTENTION
Incorrect socket
Risk of damage
DO NOT insert the charger plug here
Normal cleaning head contact pressure
Raise the cleaning head
Pedal for raising/lowering the cleaning head
Brush replacement pedal
225
120
625
2 1
3
1