32
Maintenance
Service Schedule
MAINTENANCE
DAILY
WEEKLY
QUARTERLY
Check machine for cord damage
*
Check recovery dome and gasket for damage and cleanliness
*
Check brushes - should be clean with no lint or strings attached
*
Clean the underside of the brush deck area
*
Observe spray pattern
*
Inspect vac shoe for blockage; Remove and rinse any debris
*
Check hoses for wear, blockages, or damage
*
Check handles, switches, and knobs for damage
*
Run one gallon of water through solution system at end of day
*
Clean out recovery tank, clean float screen and check float ball to
make sure it moves freely
*
Clean out solution tank
*
Clean outside of all tanks and check for damage
*
Run vacuum motor for at least one minute to allow motor to dry
*
Store with recovery dome and solution lid removed to allow the tank
to dry
*
Check drive wheels for damage and wear
*
Remove bearing cap from end of brush. Clean bearing and cap.
*
Check all bearings for noise
*
Check all gaskets for wear and leakage
*
Check and clean solution screen
*
Check brush for wear; ensure bristles are not damaged
*
Check condition of vacuum shoe and frame for damage
*
Remove the bearing end cap off of the brush and clean
*
Check overall performance of machine
*
Check belts for wear and replace as necessary
*
Check cables for fraying
*
Check pump pressure; observe spray pattern and check with gauge
if necessary
*
8.645-280.0 Manual Operator Armada BRC 45-38
