Kärcher 1500 Series, Руководство по эксплуатации

Страница: 13 / 30

13
Operations
86387270 Operator’s Manual - Floor Burnisher (1500 Series)
Controls
1. Safety Lock – Prevents unintended operation of
the machine.
2. Switch Levers – Turns machine on/off.
3. Adjustment Handle – Allows the handle to be
adjusted to a comfortable operating position.
Handle Height Adjustment
NOTE: The handle is in the up, locked position
from the factory.
The handle adjust bar (1) for the polishers are indi-
vidually preset at the factory for optimum locking effi-
ciency and minimum effort of engaging. It should not
be necessary to adjust the handle adjust bar unless
the handle adjustment bar (1) the washer (3) and nut
(2) have been disturbed.
NOTE: It is incorrect to make it lock opposite
from the way it was assembled by applying
more force to the nut.
The pivot pin is off center in relationship to the axis of
the handle. To adjust handle, tighten nut on handle
while in the locked position. The handle is locked
when the screw is to the outside of the machine and
the flat on the opposite side of the handle is flush to
the bracket.
1
2
3
2
1
2
3
4
PIVOT PIN L C
L
C
LOCKING SIDE FLAT
HANDLE