6
3. Getting started
3.1 Unpacking the cleaner
While you are unpacking the cleaner, check
that all accessories have been included. If any
items are missing, please contact your dealer.
If you notice any damage that has been
caused in transit, please inform your dealer
immediately.
Do not dispose of the packaging materials as
domestic refuse. They can be recovered for
use again. Take the packaging to an official
collection point for recycling.
3.2 Attaching the accessories
• Firmly insert the modular accessory plug
(C6) into the socket (A1) above the handle
on the main unit. Both lugs on the plug must
lock into the cover for the main unit socket.
• Attached the required accessory – spot
nozzle (E1), hand nozzle (F1) or floor
nozzle (G1) – to the steam gun (C1) by pu-
shing the tubular end of the accessory onto
the steam gun. Push the accessory onto the
steam gun as far as necessary for the re-
lease button (C2) on the steam gun to lock
into place.
• Use the extension tubes (D1) if required.
Attach one or both tubes onto the end of the
steam gun. Push the required accessory
onto the free end of the extension tube.
• To detach the accessories, press the re-
lease button and pull the items apart.
• The circular brush (E2) can be attached to
the spot nozzle to obtain better cleaning
results.Line up both grooves in the circular
brush with the lugs on the spot nozzle and
turn the brush clockwise as far as it will go.
• To detach the circular brush from the spot
nozzle, turn the brush anti-clockwise and
pull it off the nozzle.
Hot water can drip out of accessories while
you are detaching them. Do not detach acces-
sories while steam is being discharged – dan-
ger of scalding!
3.3 Filling up with water
• Unscrew the safety cap (A2) on the main
unit.
• Pour a maximum of 1.2 litres of tap water
into the boiler. With the cleaner standing on
a horizontal surface, the boiler can be filled
up to approx. 2 cm below the edge of the fil-
ler neck. Heating-up time can be shortened
by using hot water.
Do not add pour any detergents or other addi-
tives into the boiler.
• Screw the safety cap back onto the cleaner.