Kärcher 1.576-103.0, Руководство пользователя

Страница: 19 / 228

– 7
 Remove blockages in the suction nozzle, suction
tube, suction hose, or flat pleated filter.
 Replace the filled disposal bag
 Replace filled safety filter bag.
 Check the suction head and the receptacle for
proper seating.
 Ensure the filter cover properly locks into place.
 Replace the flat pleated filter.
 Connect the pressure balancing at both ends.
 Seal the unsealed suction nozzle with connection
bushing, see operation.
– Thermal protection device has switched the motor
into the emergency mode due to overheating.
 Allow appliance to cool down. Replace the supply
air filter.
 Check for proper installation of the flat pleated filter.
 Replace the flat pleated filter.
 Replace the flat pleated filter.
 If the disposal bag is full and the minimum volume
flow is fallen short of it has to be replaced.
 The safety filter sack must be replaced when it is
full and the minimum volume flow is fallen short of.
If malfunction can not be fixed, the device must be
checked by customer service.
At the end of its lifetime the appliance is to be disposed
of according to the statutory provisions.
The warranty terms published by the relevant sales
company are applicable in each country. We will repair
potential failures of your appliance within the warranty
period free of charge, provided that such failure is
caused by faulty material or defects in manufacturing. In
the event of a warranty claim please contact your dealer
or the nearest authorized Customer Service center.
Please submit the proof of purchase.

DANGER
Only use accessories that are approved by
the manufacturer and marked with the Ex-la-
bel for type 22. The use of other accessories
may pose a risk of explosion.
Only use original accessories and spare parts, they en-
sure the safe and trouble-free operation of the device.
For information about accessories and spare parts,
please visit www.kaercher.com.
–
Accessories are not included in the delivery. The
accessories for the device must be ordered sepa-
rately, depending on the application.
– The device's correct function is only guaranteed when
using the suction hose nominal width of DN40.
– You can procure the spare parts and the attach-
ments from your dealer or your KÄRCHER branch
office.
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements of the EU Directives, both in its basic design
and construction as well as in the version put into circu-
lation by us. This declaration shall cease to be valid if
the machine is modified without our prior approval.
5.966-011
The undersigned act on behalf and under the power of
attorney of the company management.
Managing Partner
M. Pfister
Kärcher Industrial Vacuuming GmbH
Robert-Bosch-Straße 4-8
73550 Waldstetten (Germany)
Phone: +49 7171 94888-0
Fax: +49 7171 94888-528
Waldstetten, 2021/11/04
Suction capacity decreases
Dust comes out while vacuuming
Indicator lamp "negative pressure" lights up
red
Customer Service
Disposal
Warranty
Accessories and Spare Parts
EU Declaration of Conformity
Product: Wet and dry vacuum cleaner
Type: 1.576-xxx
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2011/65/EU
2014/30/EU
2014/34/EU
Applied harmonized standards
EN 55014–1: 2017 + A11: 2020
EN 55014–2: 2015
EN 60335–1
EN 60335–2–69
EN IEC 61000–3–2: 2019
EN 61000–3–3: 2013 + A1: 2019
EN 62233: 2008
EN IEC 63000: 2018
Applied national standards
TRGS 519
Marking
II 3D 95 °C
19 EN