Kärcher 1.332-101, Руководство по эксплуатации, Страница: 26 / 178

Operating Manual – Snowthrower English
26
Machine does not drive along. Coupling cable for drive system not adjusted
correctly.
Adjust coupling cable (see “Adjust coupling
for the drive system”).
V-belt slack or torn (STH 5.56, STH 8.66,
STH 10.66 C) .
Have slack V-belt tightened
2
).
Have torn V-belt replaced
2
).
Drive system iced up (STH 5.56, STH 8.66,
STH 10.66 C) .
Remove ice accumulation (see “Checking the
drive system”).
Friction-wheel rubber torn. Have friction-wheel rubber replaced
2
).
Excessive vibration. Loose parts or damaged worm. Stop engine immediately and pull off spark-
plug connector. Tighten loose bolts and
nuts.Have damaged worm repaired
2
).
Gears can only be changed
with difficulty.
(STH 5.56, STH 8.66, STH
10.66 C)
.
Coupling cable for drive system not correctly
adjusted. Adjust coupling cable (see “Adjust coupling
cable for the drive system”).
Shift lever not correctly adjusted
(STH 10.66 C ,) .
Adjust shift lever (see “Adjusting the shift
lever”).
Drive system iced up (STH 5.56, STH 8.66,
STH 10.66 C) .
Remove ice accumulation (see “Checking the
drive system”).
1
) see “Engine instructions”
2
) have these tasks carried out only by a specialist workshop
Fault Possible cause Action to take