BR/BD 75/140 R, BR/BD 90/140 R
Basic Settings and Service Procedures
Page 33 / 71
New Unit Information 03.2004
Control panel test
The control panel test enables the user to check
the function of the plastic foil control panel and
the indicator lamps. The item numbers refer to
the “control panel” (page 13).
Access control panel test
To access the control panel test, press any but-
ton and switch on the key switch at the same
time.
Mode of operation
Each button has one or several indicator lamps
assigned to it, which must only light up if the button
is pressed. The assignment is:
Terminate control panel test
The test is terminated by turning the key switch
to the “0” position.
REVISED
"Wall-floor-ceiling nozzle" push-button (28) "Wall-floor-ceiling nozzle" indicator lamp (29)
"Warning beacon light" push-button (4)
"Warning beacon light" indicator lamp (1)
"Work light" push-button (3)
"Work light" indicator lamp (2)
"Increase water flow rate" push-button (24) "Magnet brake activated" indicator lamp (26)
"Reduce water flow rate" push-button (20)
"Battery empty" indicator lamp (27)
"Increase brush pressure" push-button (8)
"Brush overloaded" indicator lamp (5)
"Reduce brush pressure" push-button (11)
"Dirt water tank full" indicator lamp (6)
"Suction motor" push-button (7)
"Suction motor" indicator lamp (25)
"Water pump" push-button (22)
"Water pump" indicator lamp (21)
"Brush motor" push-button (9)
"Brush motor" indicator lamp (10)
"Info" push-button (19)
"Water pump" (21) and "Suction motor" (25)
indicator lamps
"Memo" push-button (12)
"Brush motor" (10) and "Suction motor" (25)
indicator lamps
"Forward drive" push-button (13)
"Forward drive" indicator lamp (14)
"Reverse drive" push-button (17)
"Reverse drive" indicator lamp (15)
"Horn" push-button (16)
"Forward drive" (14) and "Reverse drive" (15)
indicator lamps
