Manual Dual Mister 9.808-246.0 - E
PRESSURE
W
ASHER
SER
VICE MANU
AL
6
STEP 1:
Attach ½” hose to a disin-
fectant bucket (Recomendable that
water inlet is at floor level).
We recommend Vital Oxide.
STEP 6:
Start up the machine.
STEP 5:
Connect to apropriate
power supply. Push reset button
on GFCI.
STEP 9:
Attach misting nozzle into
the spray gun.
STEP 3:
Connect ¼” high pressure
hose to the discharge nipple. Push
coupler collar forward until secure.
STEP 7:
Close metering valve to
purge hose.
STEP 10:
Open metering valve to
use Misting mode.
CAUTION: If valve stays close in
misting mode nozzle may get
damage.
ATTENTION: Si la soupape reste
fermée en mode brumisation, la
buse peut être endommagée.
STEP 2:
Connect ½” hose to pump
Water inlet. Inspect inlets.
CAUTION: Do not run the pump
without water or pump damage
will result.
ATTENTION: Ne pas faire fonc-
tionner la pompe sans eau pour
éviter d'endommager la pompe.
STEP 8:
Purge any air trapped in
hose (Recommend to do this over
the disinfectant bucket).
STEP 11:
Ready to use, mist Vital
Oxide disinfectant.
IMPORTANT: After finish the job,
flush all chemical remains from
the unit. Fill tank with fresh water
and flush all system.
IMPORTANT: Une fois le travail
terminé, rincer tous les restes
chimiques de l'unité. Remplir le
réservoir d'eau douce et rincer
tout le système.
>19”
OPERATING INSTRUCTIONS FOR MISTING MODE
Pump
Water Inlet
Garden Hose
Discharge
Nipple
High
Pressure
Hose
Coupler Collar
STEP 4:
Attach the high pressure
hose to the spray gun.
Safety
Latch
Spray
Gun
High
Pressure Hose
