11
CD/CD+G/MP3 DISC OPERATION
ABOUT CD-R/CD-RW DISCS
PLEASE READ THIS IMPORTANT INFORMATION:
CD mechanisms used in devices like this are designed to fully read all commercial
CDs. They will also read self-compiled CD-RWs but it may take up to 10 seconds for
playback to start. If playback does not start, it is likely due to the quality of the
CD-R/RW disc and/or the compatibility of the CD compilation software. Manufacturer
is not responsible for the playback quality of CD-R/RW discs.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a
malfunction.
Note:
This unit is designed to play CDs bearing these
identification logos.
If CDs do not conform to the CD or CD+G standard, they may not
play properly.
LOADING A DISC
1. Tap the POWER ON/STANDBY button to turn on the unit. The power indicator will be
bright and the built-in monitor will be on.
If the color TFT monitor shows unit in other mode, tap the SOURCE button
repeatedly
to change to CD mode.
2. Grip the “OPEN” mark on the CD Door and pull gently to open it.
3. Load a disc into the compartment with the printed side facing upward.
4. Gently close the CD DOOR. The karaoke system begins to read the disc. The TFT color
monitor will briefly show “Disc Reading” message and then total number of tracks.
5. Tap the PLAY/PAUSE button to play disc. (If no disc is recognized, "No Disc" will be
displayed).
PLAY/PAUSE MODE
1. To start playing, tap the PLAY/PAUSE button once, the first track “01” will be
displayed and the PLAY indicator “ “ will show in the monitor.
2. To temporarily stop playing, press the
PLAY/PAUSE button, the PAUSE
indicator ” ” will show in the monitor.
3. To resume play, press the PLAY/PAUSE button again.
4. Use the MASTER VOLUME knob to increase or decrease the speaker sound.
Notes:
•
If a CD+G disc is detected, the CDG indicator will appear briefly and then the lyrics will
appear in the built-in TFT color MONITOR.
•
If desired, connect the A/V cable to an external TV monitor or home stereo system
instead (TV and/or home stereo system are not included).
STOP MODE
If the STOP button is pressed in the course of playing, the disc will cease to play. The
total number of tracks & time will be shown on the TFT color monitor.
SKIP/SEARCH
1. In stop mode, you can skip up or down to a specific track number by pressing the /
SKIP buttons.
2. While the selected track is reached, press the PLAY/PAUSE button to play.
3. During the PLAY mode, you can skip down or up to a specific track number by pressing
the / SKIP buttons respectively.
GRAPHICS
