E7
CONNECTING LIGHTED STAGE MAT
WARNING
- Please ensure the floor that you are going to use the lighted stage mat on is
completely dry to avoid slipping.
To prevent the lighted stage mat from getting damaged:
-
To keep away from water.
-
Do not step on the LED strip surrounding 4 sides of mat.
-
Do not fold the LED strip.
-
Take off shoes before you step on the mat.
1. Plug the lighted stage mat into the MAT CONTROL OUT connector at rear panel of the
base.
2. LED surrounding 4 sides of the mat will be lighting and changing with the music.
Note:
If the brightness is glaring, turn on room lights.
CONNECTING THE MICROPHONE
WARNING
- Tapping or dropping the microphone while it is on can permanently damage
your microphone. Do not swing the microphone around by the cord.
Note:
To prevent feedback or whistling from occurring, please be sure that the microphone
is not too close to unit’s speaker. Turn the ON/OFF switch located on the Microphone to the
OFF position when you put the microphone into Mic Holder.
1. Connect the supplied Microphone to either one of the MIC input jacks.
2. Press the POWER ON/OFF button to turn on the unit, the POWER INDICATOR will light.
3. Slide the ON/OFF switch located on the Microphone to the ON position and speak or
REAR SIDE OF MAIN UNIT
REAR SIDE OF MAIN UNIT
