E5
2. Fully insert the Microphone stand (wider outer pole) into the base connector
①
.
3. Fully insert the cradle connector into the Microphone stand (upper pole) and fix it by
fixing screw (included)
②
.
4. Turn the height adjusting knob in counter-clockwise direction to loosen the joint, then
move upper pole up and down to adjust the microphone stand to desired height.
Notes:
1.) For your safety, please do not insert your tablet or smartphone into the
Tablet/Smartphone holder to avoid accidental falling during stand height
adjustment.
2.) Use one hand to hold upper pole of microphone stand
while
using the other hand to loosen the knob
to avoid sudden falling of
upper pole assembly.
5. After stand height is set, tighten it up by turning the height adjusting knob in clockwise
direction
③
.
6. Move the unit to the location you want to play and connect accessories by following
operations in the user manual.
WARNING
: - When moving the unit to other locations, please use both hands to hold the
base. Do not grip the mic stand to move the unit. If you do, the heavy base may accidentally
fall to the ground which may result in damage. This will void the warranty.
LOCATION OF CONTROLS
