Kapture KPT-550, Руководство пользователя

Страница: 9 / 20

9
c. Using the DOWN button highlight the setting named Plate
Number and push OK/POWER.
d.
Use the UP and DOWN buttons to cycle through the
characters and the MODE button is used to swap
between letters and numbers. The OK/POWER button to
confirm and move between fields.
e.
Once the Number Plate has been set, the MENU button
can be used to save and exit to the VIDEO menu.
10. Set Loop Recording
Your KPT-550 has the ability to record in a Loop mode, which
means older blocks of video files will be overwritten once the
memory card becomes full. You can set the amount of video
block time the KPT-500 will record for before a new video file
is started.
a. To change the length of the videos that the KPT-550
records follow the directions below.
b. Use the MODE button to make sure you are in VIDEO
mode (Video camera icon will be displayed in the top left
corner of the screen).
c. Ensure you are not currently recording. If the red circle
record indicator is flashing at the top left of the KPT-550’s
screen, push the OK/POWER button to stop recording.
d.
Push the MENU button taking you to the VIDEO menu.
e. Use the DOWN button to highlight the setting named
Loop Recording and push OK/POWER.
f.
Use the UP and DOWN buttons to highlight the required
video length (The OFF setting will record the longest
possible loops that your Micro SD card will allow. This is
around 30 minutes at 1080P resolution).
g.
To confirm selection push the OK/POWER button, the
KPT-550 will take you back to the VIDEO menu.