Kapture KPT-550, Руководство пользователя

Страница: 10 / 20

10
11. Set G-Sensor
The G-Sensor monitors any unnatural bumps or shakes and
logs the associated footage as Locked ensuring any footage
of potential crashes is not recorded over with the regular loop
footage.
a. To set the G-Sensor follow the directions below
b.
Use the MODE button to make sure you are in VIDEO
mode (Video camera icon will be displayed in the top left
corner of the screen).
c. Ensure you are not currently recording. If the red circle
record indicator is flashing at the top left of the KPT-550’s
screen, push the OK/POWER button to stop recording.
d. Push the MENU button taking you to the VIDEO menu.
e.
Use the DOWN button to highlight the setting named
Gravity Sensing and push OK/POWER.
f. Using the UP and DOWN button, highlight the required
sensitivity of the G-Sensor (The High Sensitivity setting
will allow small bumps to log footage as Locked, and Low
Sensitivity will require a larger amounts of activity to log
footage as Locked).
g. To confirm selection push the OK/POWER button, the
KPT-550 will take you back to the VIDEO menu.
12. Set Park Mode
Park Mode will monitor for activity using the G-Sensor after
the car is parked, even if your ignition is turned off. If activity is
detected, the KPT-550 will record 60 seconds of footage.
a. To set park mode on your KPT-550 follow the directions
below.
b.
Use the MODE button to make sure you are in VIDEO
mode
(Video camera icon will be displayed in the top left corner of
the screen).