6
• Select the option “Delete Current” or “Delete All”
• Press the “Record” button to confirm your selection
• Press the “Menu” button to exit the Delete menu and return
to playback mode.
7. SOS function:
• When in video capture mode, in the case of an incident that
occurs in front of your car, press the “Menu” button.
• This will ensure the current recording is saved for later
review and will not be overwritten.
8. G Sensor:
• When in Video Recording mode with G Sensor active,
if your vehicle is stopped suddenly by the driver or by
external impact, the G Sensor will cause the DVR save the
current file.
• The sensitivity of the G Sensor can be set in the main
system under Menu choices “High”, “Medium” and “Low” in
order to suit the different speed requirements of the user.
9. Motion Detection function:
• To initiate Motion Detection mode, when in video capture
mode press the “Down” button and the DVR will stop loop
recording.
• Press the “Down” button again and the DVR will
automatically switch to Motion Detection Standby mode.
• Once motion is detected, the DVR will start recording.
• After 8 seconds the DVR will stop recording and return to
Motion Detection Standby mode until the next motion has
been detected by the DVR.
• Works even when you are not in the vehicle eg: when
parked
E. Options and system Settings
• In standby mode, press the “Menu” button to enter the
Settings Menu.
• Press the “Up” or “Down” button to make selections
• Press the “Record” button to confirm selections
• Press the “Menu” button to exit the Settings Menu.
