KP2000 User Manual Version 1.0-EN
9 of 33
Installation
Connect Scanner to computer
1.
Switch Off the Computer
2.
Refer to the below pictures, connect the USB Cable to the computer
3.
Ensure tha all the connection are secure
4.
Switch On the Computer. If installation is correct the LED
①
will lights Up and the Buzzer ⑤ will emit a beep.
Disconnect Scanner from Computer
1.
Switch Off the computer and unplug the USB Cabe
Restore factory default parameters
To restore the factory default parameters read the below barcodes in sequence
1
Start Configuration((+SETF))
2
Set All default((+RETF))
3
End Configuration((+ENDF))
Programming instruction and example
To set the device just scan the related code. Example
1
Start Configuration((+SETF))
2
Set All US Keyboard((+B2A))
3
End Configuration((+ENDF))
For more and detailed information howmto configure the scanner please refere to the
Settings chapter
