T600 Tag Tester
DOC#:
UM 360420-835
REVISION F
P
age 28 of 55
© Kapsch TrafficCom Canada Inc. 2022
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended
and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360420-835 REV F, T600 OPERATOR AND MAINTENANCE MANUAL.DOCX
03/28/2022 3:02
Kapsch TrafficCom
Command
How is this command executed?
Who can execute this
command?
What does this command do?
What is the purpose of this
command?
Test Stop
Click on
Test Stop
,
or,
press CTRL+E
anyone
Stops the margin and burst test. To abort a test in progress.
Calibrate
Click on
Calibrate
,
or,
press CTRL+L
anyone
Opens the Calibration screen.
(opens the TTU Serial Number
tab in the Configuration
window if a TTU serial number
has not been entered).
To access calibration functions.
Ignore tag type
mismatches for
tags being
calibrated
Click on
Calibrate
, then,
select the
Ignore tag type mismatches
for tags being created
check box.
Kapsch service personnel Allows results from one tag
type to be used to calibrate a
different tag type.
To use the calibration
parameters of one tag type to
be used for another tag type.
Clear calibration
data
Click on
Calibrate
, then,
click on
Clear calibration data
.
Kapsch service personnel Opens the Password window.
To clear calibration data.
Perform margin
test
Click on
Calibrate
, then,
click on
Perform margin test
.
Kapsch service personnel Opens the Password window.
Starts the calibration margin
test.
