10
OPERATING INSTRUCTIONS
Working in Automatic Mode (self-leveling):
In automatic mode the laser level will level itself in the
range of ±3° and will project crossed horizontal and
vertical laser beams.
1. Remove the laser from the pouch and place it on a
solid, flat, vibration free surface or on a tripod
2. Push the locking switch #1 to the position.
The laser level will generate the crossed horizontal
and vertical lines and the green LED will light up.
3. If the initial slope of the laser is beyond ±3° the laser
lines will flash. In this case reposition the laser on a
more leveled surface.
4. Before moving the laser level switch the locking switch
#1 back to the position, this will lock the
pendulum and protect your laser.
