Step # 4
Slide bottom back panel into back panel grooves in between bottom and middle shelves.
Step # 5
Install 8 connecting cam pins into the plastic
cam inserts on top of the middle shelf, using a
Phillips head screw driver. Tighten clockwise,
until snug. Do not over tighten, as this will
cause the plastic insert to split.
Step # 6
Now we will attach the coat hooks to both sides of the 4 top dividers, and the inside of both end
panels, using 2, 15 millimeter round Phillips head screws for each of the 10 hooks. Also, install 4
cams into each divider, into the pre-drilled cam holes. Place cam into hole with the arrow on the
cam facing the flat edge of the divider.
