36
Kaspersky Anti-Virus for Novell NetWare
servers you have specified. If there is a ‘
no
’ value
in the
Rights
column in the
mailing list table, it means there are no rights for the respective server. The rights
can be granted using the
Add rights
button (for more details please refer to
section B.1.1 on page 86).
After that switch to the
Settings
tab and set the update receiving parameters:
(for more details please refer to section B.1.2 on page 88):
•
Updating source
– from the Internet or LAN resources. If you update
the database via the Internet, the dialog box will display a list of HTTP
and FTP servers of Kaspersky Lab. If you push updates from a
network resource, a list of shared directories will be displayed.
In case of disconnection from the main source of updates, three more
attempts will be made within the 15-minute interval (the next attempt
is made in the event that the previous connection fails). Using the
Schedule
tab you can change the number of repeated attempts to
connect with the source, and the interval. During each attempt to
connect, the list of update source addresses is used from the
beginning (the main address). The addresses are tried in sequence
until the connection is established or the list of addresses is
exhausted.
•
Update copy mode
– specifies what files will be downloaded from the
update source; all the anti-virus databases available from the source
or only the new and changed ones.
•
Back up the anti-virus database
–
specifies whether or not to create
backup copies of the anti-virus database created prior to
downloading the new update.
The default option is updating via the Internet. The list of update sources
contains the addresses of Kaspersky Lab update servers. The mode is
enabled in which only changed and new anti-virus databases are
downloaded and backup copies are created before updating.
On the
Event Log
tab you can specify the name and the location of the log file,
which will contain detailed information about the results of the task execution. In
addition, you can set the log file size and specify the events to be logged (for
more details please refer to section B.1.3 on page 93).
If you have selected an Internet server as a source of the updates and plan to
use a proxy server to connect to the ISP, you will have to set up its parameters
on the
Proxy
tab (for more details please refer to section B.1.4 on page 95).
Then go to the
Schedule
tab and schedule the unattended start of the task and
set the reconnection parameters in the event of disconnection during the updates
downloading (for more details please refer to section B.1.5 on page 96).
