39 - ENG
7.4 Remote Control TV Setting
7.4.1 Checking the Set-Up Code
1.
Press the
TV STANDBY
button with
OK
button on the remote control for 2 seconds to covert to Setting Mode.
It will convert to the Setting Mode after the LED is on.
2.
Press the
INFO
button.
Set-up code will blink in oder as number of 100 digits, 10 digits, 1 digits. (Only 0 is blink 10 times.)
7.4.2 Using the Three Digit Code
1.
Press the
TV STANDBY
with
OK
button on the remote control for 2 seconds to convert to Setting Mode.
It will convert to the Setting Mode after the LED is on.
B
Setting mode will be exited if no input is made for more than 20 seconds.
2.
Point the remote control toward the TV.
3.
Find the 3-digit code for your manufacturer on the list below, and enter the code by using the number buttons.
The LED will blink once each time you enter the number.
4.
Press the
OK
button to finish.
The LED will blink 2 times and becomes "
Off
" status.
B
Some buttons may not work.
7.4.3 Using the Auto Search (TV CH+/-)
1.
Press the
TV STANDBY
with
OK
button on the remote control for 2 seconds to convert to Setting Mode.
It will convert to the Setting Mode after the LED is on.
B
Setting mode will be exited if no input is made for more than 20 seconds.
2.
Point the remote control toward the TV.
3.
Press the
TV CH +
or
-
button.
The LED will blink once each time you press the button.
4.
Press the
OK
button to finish.
The LED will blink 2 times and becomes "
Off
" status.
B
Some buttons may not work.
7.4.4 Resetting the TV to the Factory Defaults
Press the
TV STANDBY
with
(Record)
button on the remote control for 5 seconds.
After the LED blinks 5 times, resets all settings to the default values.
Содержание HD-3000
Страница 1: ...User s Manual High Definition Cable Receiver PersonalVideo Recorder ...
Страница 42: ...ENG 42 Memo ...