Kanuk Bank, Инструкция по эксплуатации

Страница: 142 / 152

142 Kanuk GmbH • Hauptstraße 131 • 01744 Dippoldiswalde
EN
KanUK DesIGn
Warranty
combustion air supply - Kanuk Design luto
In order to ensure proper combustion air supply, the front bottom ceramic
(see fig.) should be removed 2-3 times per heating period to be able to suck
out combustion residues. In case of coarse contamination, the side ceramic
parts can be removed by simply lifting them (start from the top).
exhaust pipe - Kanuk Design luto
The Kanuk Design LuTo has a flue gas extraction system in which combustion residues can be deposited due to the
flue gas routing. To ensure unrestricted operation, the entire back wall of the stove can be dismantled. We recom-
mend a cleaning interval of 1-5 times per heating period, depending on the intensity of use of the Kanuk Design
LuTo. The bottom of the flue system can be conveniently vacuumed out after the stove has cooled down completely.
Note in case of chimney fire
Using the wrong fuel or fuel that is too moist can cause a chimney fire due to deposits in the chimney. Immediately
close the air supply to the stove and contact the fire department as well as the responsible chimney sweep. After the
chimney has burned out, it should be checked by a professional for damage or leaks.
Procedure in the event of an incident - safe decommissioning
In a few cases, even a decoy fire may not create a draft in the chimney. In this case, you should contact your local
chimney sweep and never light a large fire. If flue gases are coming out of the stove, also contact the chimney
sweep and open all windows as soon as possible to ensure adequate ventilation.
WarrantY
End users have a 2-year warranty claim according to the German Civil Code (BGB). For commercial use, this is
reduced to 12 months. In principle, viewing panels, ceramic sealing cords and combustion chamber linings are
wear parts whose use-related wear and tear does not constitute a warranty case. In particular, hairline cracks in the
combustion chamber ceramics may occur due to use, but this does not impair the function in any way. We would
like to point out that normal wear and tear, which is solely due to age and/or use and which only occurs after the
transfer of risk, does not constitute a defect of the goods. If our products are used as intended, such signs of wear
and tear are possible, in particular on all components that come into contact with fire. If damage actually occurs,
please contact your Kanuk® Original contractual partner first. In principle, photographs of the defective component
and the respective installation site incl. exhaust system, fire-technical dimensioning of the chimney by means of a
calculation as well as the acceptance certificate of the chimney sweep are necessary for processing. In addition, the
production number and a detailed description of the fault are required. For this purpose, please request the form
from your contractual partner. Only original spare parts or spare parts and accessories approved by the manufac-
turer may be used for Kanuk® Original stoves. Non-intended use of the goods as well as non-observance of these
instructions may lead to loss of the warranty claim.
Warning against unauthorized modification of the fireplace
The intended use is explained in these operating instructions. Any other use is considered improper. We accept no
liability for any damage resulting from this. Intended use also includes compliance with the operating and installa-
tion instructions. Unauthorized tampering with and modifications to the unit will invalidate the operating permit.
Have your Kanuk® Original hot-air stove checked regularly for proper functionality by your specialist and note that
the Kanuk® is a time-burning stove.