Kanto Tuk Скачать руководство пользователя страница 13

13

U

U

RCA

PHONO

GND

L

R

L

R

SUB

OUT

L

R

SUB

OUT

SUB

SUB

Connecting a Subwoofer

TUK is equipped with an RCA connector to provide output signal to a powered subwoofer. 

Simply connect a single RCA subwoofer cable from the SUB OUT connection on TUK to the 

AUDIO INPUT on your subwoofer. If your sub-woofer has a stereo L / R RCA input, either left 

or right inputs will work.
We recommend the Kanto sub6 or sub8 powered subwoofer with crossover and volume 

controls. Most quality subwoofers offer these controls, which allow you to customize the 

amount of bass you will experience. 
Look for details on the Kanto website at:  www.kantoaudio.com

Sub Mute

You can mute the sub output on TUK. This can be helpful in situations where 

you want to listen to your speakers but don’t want to disturb the neighbors 

with sub-bass. 

To mute the sub output, press the SUB button. The LED will blink to confirm 

the sub output is muted. To un-mute the sub output, press the SUB button 

again. The LED will blink to confirm that the sub output has been un-muted. 

The sub output will be reactivated upon waking up from standby. 

Active Crossover

TUK is equipped with an active crossover filter at 80 HZ to allow for advanced setup with 

subwoofers. Activating the crossover will reduce the bass extension of the 

main speakers, allowing them to focus on the mid and high frequencies, 

while reducing the high frequency output of the SUB OUT port. If your 

Sub has an adjustable bandwidth or crossover frequency setting, it can be 

adjusted to the highest or most open setting. 
Active Crossover is disabled by default. You can activate Active Crossover 

by pressing and holding the SUB button for 5 seconds. The front panel 

LED will blink twice to indicate that the crossover has been activated. You 

can deactivate the crossover by pressing and holding the SUB button 

for 5 seconds. The front panel LED will blink once to indicate that the crossover has been 

deactivated. The crossover is disabled by default or when power is removed.

Содержание Tuk

















Отзывы: