WARNING
Never over-tighten a bolt into the back of your
fl
at panel TV.
Do not lay the TV face down on its glass front. Use a wall or a TV stand.
Step 1: Attach TV Brackets
Step 1.1
Select the correct size of bolt.
Kanto provides 3 bolt diameters (Metric sizes M5, M6
and M8) in various lengths.
Part items:
A
,
B
,
C
,
D
,
E
,
F
or
G
.
Select the correct diameter bolt and hand screw into the
back of the TV to determine the correct length.
Use the washer (
H
) for bolts
A
-
D
(sizes M5 and M6).
The washer will work for both bolt sizes. The washer is
not required for M8 size bolts (
E
,
F
&
G
). If your TV has
a curved back or the mounting holes are recessed, you
can use the spacers (
J, K
).
Step 1.2
Attach TV bracket arms to the back of the TV
Now that you have selected the correct bolt length and
spacers if necessary, it’s time to attach the arms (
P
) to
the TV, as shown in Diagram A.
Diagram A
Washer (H) used
with bolts A thru D
Bolts (A thru G)
There are a wide variety of TVs available o
ff
ering an assortment of bolt sizes. We provide a selection of mounting
bolts to
fi
t most TVs. If you have any concerns about this mounting hardware or installation call us direct at
1-888-848-2643 or email at [email protected].
Quick-Lock TV brackets (P)
Spacer (J, K), depending on
length of bolt and depth of
recess
4
