background image

Introduction

Table of Contents

Table of Contents / Introduction  . . . . . . . . . . . . .  2

Supplied Parts & Hardware  . . . . . . . . . . . . . . . . .  3

Setup - Step 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

Setup - Step 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

Setup - Steps 3 and 4. . . . . . . . . . . . . . . . . . . . . . .  6

Setup - Steps 5 and 6. . . . . . . . . . . . . . . . . . . . . . .  7

Other Kanto Products  . . . . . . . . . . . . . . . . . . . . . .  8

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8

2

Thank you for choosing a Kanto AV Systems tilting wall mount. The T3760 is designed to mount 

fl

 at panel televisions 

weighing up to 150 lbs (68 kg) within less than 2” of your wall. This mount will tilt your TV +10º / –5º.

Read these instructions fully before installation of this mount. If you do not understand these directions, or have 

any doubts about the safety of the installation, please consult a quali

fi

 ed installation contractor to install this mount. 

Make sure there are no defective or missing parts. Do not use defective parts. If you are uncertain whether the part 

is defective call Kanto AV Systems directly at 1-888-848-2643 or [email protected]. Kanto AV Systems can not be 

liable for property damage or injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this 

product. 

This product should not be mounted on steel stud walls or cinder block walls. Consult a quali

fi

 ed installation contrac-

tor if you are unsure about the type of wall you may have. We make every e

 ort to ensure all necessary hardware is 

included. If there is hardware missing please call Kanto AV Systems directly at 1-888-848-2643 or support@kantoav.

com.

CAUTION

The wall you plan to a

  x the Kanto mount to must be able to support more than 5 times the weight of 

the television and the wall mount combined. Do not use this product for any purpose other than to mount a 

fl

 at panel TV on a vertical surface as outlined in this manual. Improper installation may cause damage to your 

TV or serious injury. This product should not be mounted to steel stud walls, cinder block or old concrete walls. 

Consult a quali

fi

 ed installation contractor if you are unsure about the type of wall you may have.

  

CAUTION 

The maximum loading weight is 150 lbs (68 kg). This wall mount is intended for use only within the 

maximum weight restrictions indicated. Use with products heavier than the maximum weights indicated may 

result in instability causing possible injury. Recommended TV Size: 37 inch to 70 inch. 

See installation video online at: 

www.kantoliving.com

Содержание T3760









Отзывы: