Step 3: Insert Arm Assembly
into Wall Plate
Step 4: Attach TV to Wall Plate
Assemble the Arm Assembly and Screw Cover, then slide
the two parts together into the channel on the Wall Plate, as
shown in Diagram D.
The Arm Assembly will stop when it hits the Stop Screw.
Lift the TV on to the Wall Plate, hooking the TV Plate on to
the pegs of the Arm Assembly, as shown in Diagram E.
CAUTION
Read this section carefully prior to install.
WARNING
Use two people to lift and position the TV onto the Wall Plate.
Diagram D
6
Diagram E
Hook
Peg
A
D
B
Step 5: Attach the Tilt Knobs
With your TV mounted to the wall plate, insert the Safety
Knobs (
N
) through Washer (
J
) and Spring Washer (
P
), then
through the mounting slot on the TV Bracket and into
the threaded holes on the Arm Assembly, as shown in
Diagram F. You can then tilt the TV ±12° to your desired
viewing angle, tighten the Safety Knobs, and pan the TV
approximately 30° in either direction. Your installation is
complete.
If preferred, you can use the supplied Allen Bolts (
O
) in
place of the Safety Knobs (
N
), if you do not plan to use
the tilt function regularly.
Diagram F
N
J
P