Step 1.1
Select the correct size of bolt.
Kanto provides 2 bolt diameters (Metric sizes M4 and M6)
in various lengths. Part items:
E
,
F
,
G
,
H
.
Select the correct diameter bolt and hand screw into the
back of the TV to determine the correct length. Use the
longest available bolt without reaching the bottom of
the TV threads, using spacers (
K
) if your TV has a curved
back or a deep recess.
Step 1.2
Attach TV plate to the back of the TV.
Insert the selected Bolts through the appropriate
washers (
I
or
J
), TV Plate, and Spacers (
K
) (if necessary),
then thread into the mounting holes (see Diagram A).
4
WARNING
Never over-tighten a screw into the back of your flat panel TV.
Do not lay the TV face down on its glass front. Use a wall or a TV stand.
Step 1: Attach TV Plate
Diagram A
Washer (I or J)
Screws (E thru H)
There are a wide variety of TVs available that require different bolt sizes. We provide a selection of mounting bolts to
fit most TVs. If you have any concerns about this mounting hardware or installation call us direct at 1-888-848-2643 or
email at [email protected].
Spacer (K), if necessary
for curved TVs
