Supporting your digital lifestyle
™
7
Step 5: Tilt the TV
The FMX1 will tilt ±15° to provide the ideal viewing
angle. Loosen the tilt lever on the right side by rotating
it counter-clockwise from bottom to top as shown in
Diagram H. (Loosen the tilt lever on the left side by
rotating it counter-clockwise from top to bottom). To
loosen further, flip the lever to avoid contact with the TV
plate.
Tilt the TV to the desired angle, then tighten the tilt levers
by rotating them clockwise. On the right side, this is from
top to bottom, as shown in Diagram H (on the left side,
from bottom to top). To tighten further, flip the lever to
avoid contact with the TV plate.
Diagram H
Loosen
Tighten
Flip
Step 6: Cable Management
Insert your cables into the cable management clips pro-
vided on the mount arms, as shown in Diagram I. You may
move the clips from one side to the other by removing
the screws that hold the clips to the bottom of the mount
arms.
Your installation is complete.
Diagram I
