Kantech KT-1, Руководство по установке

Страница: 7 / 50

7
Pre-Installation Notes
Copyright Information
Copyright © 2016 Tyco International Ltd. and its Respective Companies. All Rights
Reserved. All specifications were current as of publication date and are subject to
change without prior notice. EntraPass, Kantech and the Kantech logo are trade-
marks of Tyco International Ltd. and its Respective Companies.
Safety Information
IMPORTANT: NEVER INSTALL THE EQUIPMENT DURING AN ELECTRICAL STORM.
WARNING: DO NOT LOOK DIRECTLY AT LED WITH UNSHIELED EYES: DAMAGE TO
RETINA MAY OCCUR.
The KT-1 One-Door Controller shall be installed and used within an environment
that provides the pollution degree max 2, and over voltages category II NON
HAZARDOUS LOCATIONS, INDOOR only. The equipment is FIXED and
PERMANENTLY CONNECTED. The KT-1 is designed to be installed by Service Per-
sons only (service person is defined as a person having the appropriate technical
training and experience necessary to be aware of hazards to which that person may
be exposed in performing a task and of measures to minimize the risks to that per-
son or other persons). The equipment is installed in a metallic cabinet that meets
the applicable requirements for a FIRE ENCLOSURE.
Note: When installed on the North American Market, powered via the
UL, cUL Listed 40VA Transformer, the KT-1 shall be connected to the
mains by a LICENSED ELECTRICIAN in accordance with the applicable
rules of the National Electrical Code or Canadian Electrical Code
regarding this type of connection.
1 - The connection to the mains supply must be made as per the local authorities
rules and regulations. An appropriate disconnect device must be provided as
part of the building installation. Where it is not possible to rely on the iden-
tification of the NEUTRAL in the AC MAINS SUPPLY, the disconnecting device
must disconnect both poles simultaneously (LINE and NEUTRAL).
2 - AVOID setting up the equipment near heaters, air conditioners, ventilators,
and/or refrigerators; DO NOT select a place that exposes your controller to dir-
ect sunlight, excessive heat, moisture, vapors, chemicals or dust.
© Copyright, 2016, all rights reserved