Kantech KT-1, Руководство по установке

Страница: 15 / 50

• Disarmed Door Shunt - When alarm system is disarmed, some zones may be
'Shunted' to a secure state.
• Entry/Exit Delay Shunt - When a user is in the process of disarming/arming
the alarm system and entry/exit delay prevails, some zones may be
'Shunted' to a secure state.
• Arming/Disarming Request
• Postpone Arming Request
Tamper Switch
The screw at the bottom of the case, which locks the cover, is also used to identify
tampering of the KT-1 cabinet.
Lock Outputs
There are 2 supervised onboard lock outputs. The locking function can also be per-
formed by any onboard relay configured for this functionality.
Note: Supervision is only provided to detect short-circuit fault, not open-circuit
fault.
Relay Outputs
The KT-1 has 2 open collector onboard switch to ground relay outputs.
The KT-1-PCB has 2 form C relays.
Reader Outputs
There are 4 different possible open collector, switch to ground, outputs. Reader out-
puts are used to give user visual and/or audible feedback on the ongoing access
events. The outputs consist of LEDs (LED, OUT1 and OUT2) and buzzer (BUZ).
Reader Interfaces
There are 2 onboard 12VDC reader interfaces. They can be programmed for Wie-
gand or ABA clock and data readers.
© Copyright, 2016, all rights reserved
15