Kantech ioProx P600, Руководство по установке

Страница: 8 / 26

Installation Manual P600 ioProx Long Range Proximity Reader
8 DN5084-0804
1.2 Operations
At power-up the P600 emits beeps and flashes the LED. The number of beeps and flashes depends
on the dipswitch mode selection, Kantech XSF or Wiegand. If the reader is set to 26-bit Wiegand,
it sounds four beeps and the LED flashes three times. If it is set to Kantech XSF format, it sounds
two beeps and the LED flashes two times.
When a card is presented, the reader evaluates the card ID for a standard Kantech format. If the
card is valid, the data are sent to the controller for user identification and a beep is heard while the
LED turns solid green for a minimum of 1/4 second (extended duration depends on the controller
setting). If permission is granted, the door unlocks. The next card can be read only after the
current card is moved out of the field (36 inches minimum from the reader) for a period of at least
one second.
Note The best read range is achieved with P10SHL cards; there will be a reduced read range
with P20DYE, P30DMG and P40KEY cards.