2-3 To thread the machine
Thread the machine correctly by referring to the next page.
Incorrect threading may cause skip stitching, thread breakage and/or uneven stitch
formation. When threading the looper, tilt the looper holder toward the front of the
machine by means of the looper drawing bar.
■
To tilt the looper toward the front
1.
Bring the needle bar to the top of its stroke.
2.
Tilt looper holder B toward the front of the machine by pressing pushbutton flat
spring A (see below).
3.
After the machine is threaded, replace the looper holder.
2
