KANSAI SPECIAL DFB1012P, Инструкция

Страница: 24 / 32

21
9999----2 Stitch length 2 Stitch length 2 Stitch length 2 Stitch length
The stitch length can be adjusted from 2 to 5mm
with no step. The following table shows the stitch
length with the number of stitches within 1 inch
(25.4mm) and 30mm.
No. of stitches Stitch
length (mm)
within 1" within 30mm
2 13 15
3 8.5 10
5 5 6
■
To change the stitch length
1. Loosen bolt A while checking the direction in
which the bolt is loosened.
2. Insert a screwdriver from hole C.
To decrease the stitch length, turn screw B
clockwise. To increase the stitch length, turn
screw B counterclockwise.
3. After this adjustment is made by turning screw B, be sure to tighten screw A.
【
10
】
ADJUSTING THE PRESSER FOOT
10 10 10 10----1 Presser foot pressure 1 Presser foot pressure 1 Presser foot pressure 1 Presser foot pressure
The presser foot pressure should be as light as
possible, yet be sufficient to feed the fabric and
produce uniform stitches.
To increase the presser foot pressure, turn the
adjusting knob clockwise.
< Note >
Be sure turn off the motor when changing the stitch length.