KANSAI SPECIAL BX Series, Инструкция по эксплуатации

Страница: 12 / 26

9
【
3
】
MACHINE SPEED
3333----1 Machine speed & direction in which the machine pulley runs 1 Machine speed & direction in which the machine pulley runs 1 Machine speed & direction in which the machine pulley runs 1 Machine speed & direction in which the machine pulley runs
Refer to the table below for maximum and standard
speeds of the Series. To extend machine life, run
the machine approximately 15~20% below the
maximum speed for the first 200 hours of operation
(approx. 1 month). Then run the machine at the
standard speed. The machine pulley turns
counterclockwise as seen from the end of the
machine pulley.
3333----2 Mot 2 Mot 2 Mot 2 Motor & belt or & belt or & belt or & belt
Motor : 3-phase, 2-pole, 400W clutch motor
Belt
: M type V belt
Select the proper motor pulley according to the
machine speed (refer to the motor pulley outer
diameter on the table below).
Adjust the position of the motor by pressing the
finger onto the middle of the belt so that 1~2cm
deflection can be achieved (see the illustration on
the right).
< Machine speed >
Model Maximum speed Standard speed
BX1433 2500 2000
BX1033 2500 2000
PSM 2000 1500
< Motor pulley selection table >
Machine speed (SPM) Motor pulley
outer diameter
(mm)
50Hz 60Hz
30 1250 1450
40 1650 1950
50 2050 2450
60 2500 2950
70 2900 3450