219 Route 206 Phone: 1-800-247-8887
PO Box 372
Fax: (973) 786-7586
Andover, NJ 07821 USA [email protected]
6813
™
User Manual, PN 10283
Kanomax USA, Inc
Rev 2.0, 24-Nov-2009
www.kanomax-usa.com
Copyright © 2008, Kanomax USA, Inc.
Page 18 of 24
TM
On the next window, next to “Connect using,” select the COM port you
that you are using with your instrument. Click OK.
In the next window, select the port settings as shown below and click
OK. (The Serial Port settings are also listed at the end of this section).
219 Route 206 Phone: 1-800-247-8887
PO Box 372
Fax: (973) 786-7586
Andover, NJ 07821 USA [email protected]
6813
™
User Manual, PN 10283
Kanomax USA, Inc
Rev 2.0, 24-Nov-2009
www.kanomax-usa.com
Copyright © 2008, Kanomax USA, Inc.
Page 7 of 24
TM
SECTION 2 – SWITCH FUNCTIONS
Pressing the ON/OFF key switches the instrument ON. Hold down the
key for 2 seconds to switch the unit OFF. The unit will automatically
power off after 30 minutes without any key presses. To disable auto
power-off, hold down the power button during turn-on. The unit will
flash AOFF, which means that the auto power-off has been disabled.
The auto power-off is re-enabled each time the instrument is turned on.
Press the BACKLIGHT key to turn the LCD backlight on for 30
seconds. To turn the backlight on permanently, hold the backlight key
down for 3 seconds. The LCD will flash. The backlight is now
switched on permanently. To switch the backlight off, press the backlight key
again.
