Kangaroo KG 43H, Руководство пользователя

Страница: 11 / 12

TROUBLE SHOOTING GUIDE
18 19
Problem
Not working
Not good in colding
Noise and strange
sound
Hot water not
working well
Water leakage
Particle piece of ice
produced
Possible reason
1. Electric cord is wrong
2. Power cord is bad
3. Fuse is cut
1. Airing of the back
side is bad
2. The thermostat controller
is not in good condition
1. Flow installed dispenser
is not horizontal
2. ouching to other T
products
1. Electric power is not
applied
2. Hot water switch is off
1. connecting hose
came out
Thermostat badly
controlled
Solution
1. Check the power source
2. Check the power cord
3. Change fuse
1. Maintain at least 15cm from
wall for a good ventilating
2. Turn the thermostat controller
to more colder place
1. Place dispenser on hard,
level floor
2. Avoid touching to other
products
1. Confirm electric power
(220-240V)
2. Turn on the hot water switch
1. Extract power cord
2. Confirm the connecting hose
Adjust the thermostat control
to proper position
If the product won't be use to prolonged period
1. Water can be drained completely by loosening the hot-cold water caps
2. Remove any remaining surface moisture from each part of the product. Damp
surface cause rusting
3. Wrap the product in its original vinyl and corrugated paper to prevent from being
damaged by rust, dust and other foreign substances.
4. To use again, follow the installing instruction.
Cleaning method
HOW TO USE THE PRODUCT
Parts to be cleaned
Waste water tank
Hot-warm-cold faucet
External
Hot-cold water tank
Frequency
Twice daily
Once daily
Once per 3 days
Weekly
Cleaning method
Check frequently and wipe off with
neutral detergent
Clean with damp cloth and then wipe,
using dry cloth
Clean with damp cloth, do not use
…
gasoline, benzene
such as materials
may change the surface color or
scratch the sur face
Replace water, wipe with damp cloth
How to clean the cold water tank
1. Take off the screw fixing top cover fixing top cover on the rear of product
2. With pulling the top cover after the hold up a little at the rear side, lift up the top cover