SW-2X14KUSBC – 2x1 USB-C & HDMI Auto switcher
18
⚫
The “XXXX” represents the
specific command (ASCII, up to
48 byte).
#SET_AD_[B]_
[T]:XXXX
Send the command "XXXX" to the
third-party device while the
VOLUME -
key is pressed.
⚫
The “[B]” represents the baud
rate of third-party device, and its
value is “00~06”, the
corresponding baud rate shows
at above list.
⚫
The “
[T]
” represents the delay
time of sending command, and
its value is “00~99”.
⚫
The “XXXX” represents the
specific command (ASCII, up to
48 byte).
Command:
#SET_AD_05_30:ABCDEFG
Feedback:
@BAUDRATE: 4800
@DELAY TIME: 30 s
@VOLUME - TO SEND:ABCDEFG
Note: These third-party device control commands not need to end with
“
<CR><LF>”.
