SW-2X14KUSBC – 2x1 USB-C & HDMI Auto switcher
9
5. Button Control
5.1
Manual Switching
When the switcher is in the manual switching mode, press the
SELECT AUTO/3s
button repeatedly to cycle through the two video inputs, and the corresponding source
LED illuminates orange immediately.
5.2
Automatic Switching
Press and hold the
SELECT AUTO/3s
button at least three seconds to enable
automatic switching. The current input source will not be changed, and its source LED
will turns green.
When in the AUTO mode, the switcher will switch according to the following rules:
⚫
Press and hold the SELECT AUTO/3s button at least three seconds again can exit
AUTO mode, but the input source will not be changed, and the corresponding
source LED will turns orange.
⚫
New input: Upon detecting a new input, the switcher will automatically select the
new input.
⚫
Press the SELECT AUTO/3s button also can forcibly change the input source.
⚫
Reboot: Once power is restored to the switcher, it will automatically reconnect the
input before powered off.
⚫
Source removed: When an active source is removed, the switcher will switch to the
other active input.
5.3
Display Control
The switcher supports CEC, and the
DISPLAY
buttons on the front panel are designed
for Display On/Off and volume adjustment.
⚫
ON: Display On.
⚫
OFF: Display Off.
⚫
: Mute/unmute display audio.
⚫
: Volume down display audio.
⚫
: Volume up display audio.
