KanexPro SP-HDBT1X4, Инструкция по эксплуатации

Страница: 9 / 23

SP-HDBT1X4
5
3.2 System Diagram
3.3 Connection Procedure
Step1. Connect a HDMI source device (e.g. Blue-ray DVD) to the HDMI INPUT socket
of HDBaseT Splitter with HDMI cable.
Step2. Connect a HDMI display to HDMI OUTPUT socket of HDBaseT Splitter with
HDMI cable.
Step3. Connect HDMI Twisted Pair PoC Receiver(s) to HDBaseT output port(s) of
HDBaseT Splitter with twisted pair.
Step4. Connect control device (e.g. PC) to the RS232 IN port of HDBaseT Splitter or
HDMI Twisted Pair PoC Receiver (bi-directional RS232 control, either end is
available).
If you want to cascade RS232 signal among several HDBaseT Splitters through
RS232 LOOP, connect the
RS232 LOOP socket of one of them and the RS232
IN socket of the next until all HDBaseT Splitters have been connected.
Step5. Connect an IR Receiver to the IR IN port, and an IR Emitter to the IR OUT port.
The IR signal can be transmitted bi-directionally between HDBaseT Splitter and
HDMI Twisted Pair PoC Receiver(s).
If you want to cascade IR signal among several HDBaseT Splitters, connect the