KanexPro SP-HDBT1X4, Инструкция по эксплуатации

Страница: 8 / 23

SP-HDBT1X4
4
IR receivers to transmit HDMI signal
IR
Ø IN: Connect with IR Receiver to receive IR signal from IR
Emitter.
Ø LOOP: Cascade IR control signal to another HDBT Splitter
by connecting to its IR IN socket
Ø OUT: Connect with IR emitter to emit the IR signal received
from the receiver side.
ID PRESET
Assign ID for HDBaseT Splitter to identify every unit, the value
may vary from 00~09.
After assigning ID, restart HDBaseT Splitter for stable
performance.
RS232
Ø
IN: connect with control device through 3-pin captive cable
Ø LOOP: cascade RS232 control signal to another splitter by
connecting to its RS232 IN port
Note: Please set the communication protocol parameters
correctly, and send RS232 commands referring to instructions
in
3.6 RS232 Control.
⑥
EDID DIP
Switchers
4-pin EDID DIP switchers, “1” stands for “On”, “0” stands for
“Off”. Dial the switches to change EDID data refering to
4.3
EDID Management .
DC 24V
Plug a 24V DC power adapter into this socket and tighten the
screw.
Note: Pictures shown in this manual are for reference only; different model and
specifications are subject to real product.
3. System Connection
3.1 Usage Precautions
1) System should be installed in a clean environment and has a prop temperature and
humidity.
2) All of the power switches, plugs, sockets and power cords should be insulated and
safe.
3) All devices should be connected before power on.