KANEXPRO
HDMX88-18G
17 |
P a g e
6.3.4 Scene Commands
Command
Function
Feedback Example
Save[Y].
Save the present operation to the
preset command [Y], ranges from 1 to
10.
Save To FY (Y=1-10)
Recall[Y].
Recall the preset command [Y].
Recall From FY (Y=1-
10)
Clear[Y].
Clear the preset command [Y].
Clear FY (Y=1-10)
6.3.5 HDCP Compliance
Command
Function
Feedback Example
/%[Y]/[X]:[Z].
HDCP management command.
Y=O is for output;
X=1~8 is the number of the port, if the
X=ALL, it means all ports;
Z is for HDCP compliant status, the
value may be 1 (HDCP compliant) or
0 (not HDCP compliant).
/%[Y]/[X]:[Z].
%0801.
Auto HDCP management, activate
carrier native mode
%0801
%9973.
Query the HDCP status of the input
signals.
In 01 02 03 04
HDCP Y N Y N
In 05 06 07 08
HDCP Y Y Y N
%9974.
Query the HDCP status of the output
signals.
Out 01 02 03 04
HDCP Y Y Y Y
Out 05 06 07 08
HDCP Y Y Y Y
6.3.6 EDID Configuration
The DIP switcher status should be set as 1111 to enable Software EDID management
mode: RS232 control or Web-based GUI control.
Command
Function
Feedback Example
