KANEXPRO
HDMX88-18G
13 |
P a g e
6.
RS232 Control
6.1 Installation/uninstallation of RS232 Control Software
Installation
Copy the control software file to the computer connected with the
Matrix Switcher.
Uninstallation
Delete all the control software files in corresponding file path.
6.2 Basic Settings
Firstly, connect the Matrix Switcher with necessary input devices and output devices.
Then, connect it with a PC installed RS232 control software. Double-click the software
icon to run this software.
Here we take the software
CommWatch.exe
as example. The icon is showed as
below:
Figure 6- 1 Icon of
CommWatch
The interface of the control software is showed as below:
Figure 6- 2 Control Interface of
CommWatch
Set the parameters (baud rate, data bit, stop bit and parity bit) correctly to ensure
Parameter
Monitoring area,
indicates whether the
command sent works.
Command Sending
