HDBASE100POEL Extender
6
3.2 System Diagram
Figure 3 System Diagram
3.3 Connection Procedure
Step1.
Connect HDMI source (such as DVD player) to HDMI IN port of the transmitter
with HDMI cable.
Step2.
Connect HDBT OUT port of HD Transmitter and HDBT IN port of HD Receiver,
with single CAT5e cable.
Step3.
Connect HDMI displayer (such as HDTV) to HDMI OUT port of HD Receiver with
HDMI cable.
Step4.
Both HD Transmitter and HD Receiver have IR IN and OUT. When one model
use for IR signal receiver, the other model must send out the IR signal.
For example: When “IR IN” of HD Transmitter connects with an IR receiver, the
IR Emitter must be connected to “IR OUT” of HD Receiver.
Step5.
To set as a LAN, one of the four ETHERNET ports of HD Transmitter and HD
Receiver should be used for Internet access, and the others can be connected
with computers.
Step6.
Connect the RS232 port of the computer and the RS232 port of HD Transmitter
or HD Receiver (any one is able to work as the RS232 signal can be transmitted
bi-directionally) by using a RS232 cable.
Step7.
Connect with DC24V power adaptor(s) (Any end of HD Transmitter and HD
